Men's Hooded 5/4mm Surfing Wetsuit

No more ice cream headaches when duck diving!

If you're surfing where it's cold enough to need a 5/4 wetsuit, you're going to want a hood too.We built a hood into this wetsuit, because this way it's more watertight than using a separate hood (and easier too).

SmoothSkin edges are soft and comfortable on your face, while providing a seal against cold water.

Adjust the hood's tightness with a simple pull of the bungee cord.

If you know wetsuits, you know how important the seams are. Maybe even more important than the thickness of the neoprene!

Flatlock stitching is much cheaper, but it pokes thousands of little holes along the seams, which allows cold water to seep through.

That's why we use the gold-standard in our hooded wetsuits:GBS Taped Seams(Glue and Blind Stitched).

This type of stitching doesn't penetrate all the way through the neoprene, so there aren't thousands of little holes on the seams.

Major upgrade from flatlock stitching, but then we go even farther, and glue the seams and add a strip of neoprene tape to really seal the seams and keep them as watertight as possible.

Of course we had to do it this way for our cold water wetsuit.

Again, we only want to use the finest quality materials in our wetsuits.

Last thing you need is your zipper stuck from corrosion, when that cold icy swell is pumping.

You probably won't think twice about the zipper. But we did.

Because why not?

Well, it is more expensive.

But it's our little way of paying it forward to Mother Nature.

Your 5/4 Hooded Wetsuit will arrive in a cardboard box instead of plastic packaging.

Wear the wetsuit, recycle the box!